Washer Repair
Leaks, won't spin, strange noises, or error codes. We fix all washer brands and models fast.
Fast, reliable, and professional service you can trust. Same-day appointments available for all major brands across the DMV area.
From emergency breakdowns to routine maintenance, our certified technicians handle it all.
Leaks, won't spin, strange noises, or error codes. We fix all washer brands and models fast.
No heat, takes too long, or won't start. Get your laundry routine back on track today.
Not cooling, ice buildup, or water leaks. Protect your food with same-day fridge repair.
Won't heat, uneven cooking, or broken controls. Cook with confidence again.
Not draining, poor cleaning, or leaks. We'll have it running like new.
Temperature issues, frost buildup, or strange sounds. Keep your frozen goods safe.
From a washer that won’t drain to one that leaks water all over the floor, we diagnose and fix washing machine problems the same day — all brands, front load and top load.
Standing water left in the tub is usually a clogged drain pump, a kinked drain hose, or a failed lid/door lock switch.
No spin usually points to a worn drive belt, a bad lid switch, or a failing motor coupler.
Leaks can come from a cracked tub seal, a loose hose connection, or a worn door boot (front load).
Thumping during spin is often a broken suspension spring or worn shocks; grinding usually means bearings.
We check the door lock, control board, and power supply to find out exactly why.
We know what each code means across LG, Samsung, Whirlpool, GE, and Maytag models.
A dryer that runs cold, takes two cycles to dry a load, or won’t start at all is usually an easy fix. We diagnose gas and electric dryers on the spot, same day.
Often a blown thermal fuse, a failed heating element (electric) or igniter (gas), or a tripped thermostat.
We check the door switch, start switch, thermal fuse, and control board.
Almost always a clogged vent line or a failing moisture sensor.
Usually worn drum support rollers, a bad idler pulley, or a failing drum bearing.
If the drum won’t spin but the motor hums, it’s often a broken drive belt.
Usually a failed igniter or gas valve solenoid.
A warm fridge means food on the line. We diagnose sealed system, compressor, and defrost issues fast, and carry the parts to fix most refrigerators same-day.
We check condenser coils, evaporator fan, start relay, and compressor to isolate the failure.
Usually a failed evaporator fan or a blocked air damper between compartments.
Often a clogged or frozen defrost drain.
No ice, small ice, or a jam is usually a water inlet valve, module, or frozen fill tube.
Often a failing start relay or compressor.
Points to a defrost system failure — heater, thermostat, or timer.
Dinner shouldn’t wait on a broken oven. We repair gas and electric ovens, ranges, and stovetops — from a burner that won’t light to an oven that won’t hold temperature.
A gas oven that clicks but won’t light is almost always a failed igniter or dirty burner assembly.
Usually a burned-out bake or broil element, or a failed igniter/relay board.
We check the control board, power supply, and door lock switch.
Usually a failing temperature sensor or a control board calibration issue.
A dead gas burner is often a clogged port or bad igniter.
Turn it off and call us immediately — this needs urgent, safe repair.
Standing water, cloudy dishes, or a dishwasher that won’t start — we diagnose and repair all major dishwasher brands, usually the same day.
Usually a clogged drain pump, a kinked drain hose, or a blocked air gap.
Often a clogged spray arm, a failing wash pump, or a bad water inlet valve.
Usually a worn door gasket, a cracked tub, or a loose hose connection.
Often a failed door latch switch, a tripped control board, or a power supply issue.
We check the water inlet valve, float switch, and fill sensor.
Usually the wash motor bearings or the pump/chopper assembly.
Whether it’s a chest freezer, upright freezer, or the freezer side of your fridge, we diagnose temperature and frost problems fast to protect what’s inside.
We check the compressor, condenser coils, evaporator fan, and door seal.
Usually a failed defrost heater, thermostat, or timer, or a door seal issue.
A door that pops open or won’t seal tight wastes energy and causes frost.
Often a bad thermostat, a dirty condenser coil, or a refrigerant issue.
Buzzing or clicking usually points to a failing start relay or compressor.
Usually a clogged or frozen defrost drain line backing up.
BZ Appliance Repair LLC is a locally owned business serving Northern Virginia, Maryland & DC with honest, reliable repairs.
Most repairs completed on the first visit. We know a broken appliance can't wait.
Whirlpool, GE, Samsung, LG, Maytag, KitchenAid, Bosch, and more.
No hidden fees, no surprises. We give you a clear quote before any work begins.
Full coverage and certified technicians. Your home and appliances are in safe hands.
From McLean to Silver Spring, we're never far away.
"BZ Appliance saved us when our fridge died on a Saturday morning. The technician arrived within 2 hours and had it fixed before noon. Fair price, great service!"
"I've used them three times — washer, dryer, and dishwasher. Every time they show up on time, diagnose quickly, and the repair lasts. Highly recommend."
"Honest pricing and no upselling. The technician explained everything clearly and even gave me tips to prevent future issues. This is my go-to repair company."
Ready to schedule? Call, email, or fill out the form — we respond fast.
Monday – Saturday: 8:00 AM – 6:00 PM
Sunday: Closed (Emergency calls considered)
Your review helps other homeowners in Northern Virginia, Maryland & DC find reliable appliance repair. It only takes 30 seconds!